How to make ahoge easily? Twin drill with vinyl tie processing
At last, a production using vinyl ties.
version? The production using vinyl ties has finally become a version?
Since the previous
"How to make a twin drill."
About.
We have received inquiries about
We have been unable to find a reliable and easy way to do this.
We are pleased to finally introduce you to it.
It's taken me a long time.
I'm really sorry (><)
The twin drill character.
Today, more and more these days....
Twin drills that clearly defy gravity are
Perms and curls could not reproduce it very well.
And even if it were to be made with bond, it wouldn't necessarily work...
Have you ever had such an experience?
An easy way to do it!
In "The Application of Vinytia Hairs."
I'm going to do a twin drill!
All you need to do is
Vinyl ties and transparent packing tape (like a transparent version of packing tape)
Then, use the same procedure as with the cellophane tape.
Sand the vinyl ties, back to back, with the tape.
In order to increase the strength of the vinyl tape
two or three pieces of vinyl tape parallel to each other to increase strength.
Then, apply bond on one side and stretch it out.
Attach the hair bundles together.
Flip it over and press down on the top to flatten it out.
Bond and attach a bunch of hairs on top of this as well.
Then, before it dries.
Bend it into the desired shape. Holly.
Once dry.
Prepare the wig for the foundation ~.　The wig will be used as a foundation for the wig.
Decide on the position to attach.
When sewing it on, it is convenient to fold it in two!　(No´e).
Since it is vinyl tie + tape, you can bend it into any shape you like and process it.
After bending, sew it on with a needle and thread.
Remove the rubber.
Decide on the net part of the wig where you want to sew it.
Install the prepared twin drill parts.
At this time, the twin tails should not fall down easily.
Sew the twin tails upward.
When you let go of your hand, the twin tails will fall down by themselves.
It's a little confusing.
I sewed it on with brown thread. (Holy shit!)
Drill twin is sewn in place. ↓↓
Then, with the hairs of the foundation wig.
The sewn part of the wig is
Tie it tightly with wire or elastic. ∋ ∋ ∋ ∋ ∋ ∋ ∋ ∋ ∋ ∋ ∋ ∋ ∋ ∋
From the side, it looks quite natural.
The root of the knot looks thinner from the back as well.
It looks like a twin-tail ⌒ﾟ(σ,σ)⌒
That was a bit of a rushed explanation.
It can be applied to various forms.
We would be happy if you could try it.
See you soon.
Cosplay General Specialty Store Classe Top
At last, a production using vinyl ties.
version? The production using vinyl ties has finally become a version?
Since the previous
"How to make a twin drill."
About.
We have received inquiries about
We have been unable to find a reliable and easy way to do this.
We are pleased to finally introduce you to it.
It's taken me a long time.
I'm really sorry (><)
The twin drill character.
Today, more and more these days....
Twin drills that clearly defy gravity are
Perms and curls could not reproduce it very well.
And even if it were to be made with bond, it wouldn't necessarily work...
Have you ever had such an experience?
An easy way to do it!
In "The Application of Vinytia Hairs."
I'm going to do a twin drill!
All you need to do is
Vinyl ties and transparent packing tape (like a transparent version of packing tape)
Then, use the same procedure as with the cellophane tape.
Sand the vinyl ties, back to back, with the tape.
In order to increase the strength of the vinyl tape
two or three pieces of vinyl tape parallel to each other to increase strength.
Then, apply bond on one side and stretch it out.
Attach the hair bundles together.
Flip it over and press down on the top to flatten it out.
Bond and attach a bunch of hairs on top of this as well.
Then, before it dries.
Bend it into the desired shape. Holly.
Once dry.
Prepare the wig for the foundation ~.　The wig will be used as a foundation for the wig.
Decide on the position to attach.
When sewing it on, it is convenient to fold it in two!　(No´e).
Since it is vinyl tie + tape, you can bend it into any shape you like and process it.
After bending, sew it on with a needle and thread.
Remove the rubber.
Decide on the net part of the wig where you want to sew it.
Install the prepared twin drill parts.
At this time, the twin tails should not fall down easily.
Sew the twin tails upward.
When you let go of your hand, the twin tails will fall down by themselves.
It's a little confusing.
I sewed it on with brown thread. (Holy shit!)
Drill twin is sewn in place. ↓↓
Then, with the hairs of the foundation wig.
The sewn part of the wig is
Tie it tightly with wire or elastic. ∋ ∋ ∋ ∋ ∋ ∋ ∋ ∋ ∋ ∋ ∋ ∋ ∋ ∋
The root of the knot looks thinner from the back as well.
It looks like a twin-tail ⌒ﾟ(σ,σ)⌒
That was a bit of a rushed explanation.
It can be applied to various forms.
We would be happy if you could try it.
See you soon.
Cosplay General Specialty Store Classe Top
