Blocking method that minimizes the possibility of cutting failure
Hello everyone!
My name is Aoi, and I am in charge of class styling.
This time, I would like to introduce a recommended method to "minimize the possibility of cutting failure".
I would like to introduce a recommended method to "minimize the possibility of cut failure".
It is...
Before cutting a wig, separate the hair into small sections.
That's blocking!
You can use this technique for any wig.
First, comb the hair of the wig
to prevent snagging.
If you are combing a curly wig, the curls will come out, so leave it as it is!
Be careful not to pull when cutting.
Start with the bangs.
Basically, the triangle from the top of the head to the corner of the eyes is the bangs.
Cut the bangs after parting the triangle as shown in the photo.
Using a hair clip is convenient for holding the hair in place while parting it.
It is easier to cut the hair if you divide it in half instead of cutting it all at once.
Cut bangs.
For more information on how to cut
　How to cut the hair to prevent "I did it! Basic cutting method to prevent
For more information on how to cut bangs
URL→https://classewig.com/wig/blog/?p=1620
for more information.
Blocking before cutting is in addition to the bangs.
Hair next to the ear (which will be the fringe part) and
the back of the hair vertically in half, and also horizontally...etc.
It's more accurate to cut in smaller blocks. ......
We don't have time for that before the event!
We must cut it as soon as possible!
I am sure many of you think so.
But, even if it's a hassle, you have to do the blocking!
Cutting in a hurry → failure
Blocking is a great way to prevent a cut from going awry in a hurry!
Recommendation of Blocking Separation Method
This is a rough parting method.
1】Partition the hair into three sections: the front, the top half, and the bottom half.
1] Bangs
[2] [3] Split into upper and lower halves.
The important thing about the back of the hair in [2] and [3] is the order in which the hair is cut!
The order of cutting is
3] Lower half → [2] Upper half
Cut the bottom half first.
Cut the bottom half first, then let down the hair parted in the upper half and cut again.
For more information about cutting, please refer to
　Basic cutting method to prevent "I did it! Basic cutting method to prevent
for more information.
[Recommendation for blocking division ★★★★]
If you want to separate the hair more carefully and cut it properly
1】front hair [2】from the top of the head to the fringe behind the ears (both left and right sides).
3] The upper half of the hair in the back [4] The lower half of the hair in the back.
Divide the hair into the following two parts.
1] the front hair and [2] the hair from the top of the head, from the fringe to behind the ears (both on the left and right sides).
3] [4] The upper and lower halves of the hair in the back.
Recommendation for blocking division: ★★★★★]
This is a parting method that we want first-timers to try.
1】Front hair
2] [3] Top and bottom of the hair from the top of the head to the fringe behind the ears (both left and right sides).
4] [5] [6] The top, middle, and bottom of the hair in the back.
Divide the hair into the following three sections.
↓Part it finely like this.
As much as possible, keep the parting straight.
A comb like the one in the picture will make it easier to part the hair!
Cut the hairs starting from the bottom (the lowest section of the blocking).
For details, please refer to â—†Basic Cutting Methods to Prevent "I did it! for more information.
Use elastics, clips, pins, etc. to keep uncut hair out of the way.
It is easier to cut hair without it getting in the way of your work.
It is easier to cut hair without getting in the way of your work.
How was it?
If you find it a little difficult
We suggest you don't think too hard, but actually try it out!
Seeing is believing!　Seeing is believing!
Well, I will see you again (*'omega'*)sh
Go to Cosplay General Store Classe Top
Hello everyone!
My name is Aoi, and I am in charge of class styling.
This time, I would like to introduce a recommended method to "minimize the possibility of cutting failure".
I would like to introduce a recommended method to "minimize the possibility of cut failure".
It is...
Before cutting a wig, separate the hair into small sections.
That's blocking!
You can use this technique for any wig.
First, comb the hair of the wig
to prevent snagging.
If you are combing a curly wig, the curls will come out, so leave it as it is!
Be careful not to pull when cutting.
Start with the bangs.
Basically, the triangle from the top of the head to the corner of the eyes is the bangs.
Cut the bangs after parting the triangle as shown in the photo.
Using a hair clip is convenient for holding the hair in place while parting it.
It is easier to cut the hair if you divide it in half instead of cutting it all at once.
Cut bangs.
For more information on how to cut
　How to cut the hair to prevent "I did it! Basic cutting method to prevent
For more information on how to cut bangs
URL→https://classewig.com/wig/blog/?p=1620
for more information.
Blocking before cutting is in addition to the bangs.
Hair next to the ear (which will be the fringe part) and
the back of the hair vertically in half, and also horizontally...etc.
It's more accurate to cut in smaller blocks. ......
We don't have time for that before the event!
We must cut it as soon as possible!
I am sure many of you think so.
But, even if it's a hassle, you have to do the blocking!
Cutting in a hurry → failure
Blocking is a great way to prevent a cut from going awry in a hurry!
Recommendation of Blocking Separation Method
This is a rough parting method.
1】Partition the hair into three sections: the front, the top half, and the bottom half.
1] Bangs
The important thing about the back of the hair in [2] and [3] is the order in which the hair is cut!
The order of cutting is
3] Lower half → [2] Upper half
Cut the bottom half first.
Cut the bottom half first, then let down the hair parted in the upper half and cut again.
For more information about cutting, please refer to
　Basic cutting method to prevent "I did it! Basic cutting method to prevent
for more information.
[Recommendation for blocking division ★★★★]
If you want to separate the hair more carefully and cut it properly
1】front hair [2】from the top of the head to the fringe behind the ears (both left and right sides).
3] The upper half of the hair in the back [4] The lower half of the hair in the back.
Divide the hair into the following two parts.
1] the front hair and [2] the hair from the top of the head, from the fringe to behind the ears (both on the left and right sides).
3] [4] The upper and lower halves of the hair in the back.
Recommendation for blocking division: ★★★★★]
This is a parting method that we want first-timers to try.
1】Front hair
2] [3] Top and bottom of the hair from the top of the head to the fringe behind the ears (both left and right sides).
4] [5] [6] The top, middle, and bottom of the hair in the back.
Divide the hair into the following three sections.
↓Part it finely like this.
As much as possible, keep the parting straight.
A comb like the one in the picture will make it easier to part the hair!
Cut the hairs starting from the bottom (the lowest section of the blocking).
For details, please refer to â—†Basic Cutting Methods to Prevent "I did it! for more information.
Use elastics, clips, pins, etc. to keep uncut hair out of the way.
It is easier to cut hair without it getting in the way of your work.
It is easier to cut hair without getting in the way of your work.
How was it?
If you find it a little difficult
We suggest you don't think too hard, but actually try it out!
Seeing is believing!　Seeing is believing!
Well, I will see you again (*'omega'*)sh
Go to Cosplay General Store Classe Top
