Category_キャラクター
Category_セット・カット>ポニテ・ツインテ
cos
cosplay
wig
ウィッグ
ウィッグカット
ウィッグセット
コス
コスプレ
ボリューム
ポニーテール
刀剣乱舞
大和守安定
How to make a wide volume tail
This time with Yamato Mamoru Stable from Sword Ranbu.
with a lot of volume.
I'll show you how to make a side-swept ponytail!
I used.
Ponytail Base - Deep Blue 06
Vance 40cm - Deep blue 06
1，First, to make it easier to bite the valance.
First, cut the tail section to about the length shown in the picture.
2,Remove the clip from the valance, rotate it 90 degrees, and
2, Remove the clip from the valance, rotate it 90 degrees, and then reinsert the clip into the valance.
(It will be a horizontal valance.) 3.
See the video for more details.
https://youtu.be/aTBLlKsEy6k
By rotating the vance clip 90 degrees
the volume of the width is increased.
3, Attach the valance to the wig and cut the part where you want the hair to spring up.
Cut the part you want to make springy, and set it by applying heat with an iron.
Each time they move away from each other, watching the balance.
The overall silhouette is determined by looking at the balance of the two pieces.
4,Avoid sideburns and cut bangs diagonally.
It is easier to make it natural by cutting it a little longer and combing the ends while shaping.
Waxed, twisted and trimmed the ends of the hair.
5,Side hair is also cut.
Slide from top to bottom as if scraping the surface.
Cutting can be easily stepped.
6,Sideburns are also done on the outside. Spray with SGS (super stiff) spray and you're done!
The key is to make sure you can see the spring from the side!
Other! If you have any problems with the style, color, or processing of your wig, please contact us.
please feel free to contact our staff!
Email: message@classewig.com
1，First, to make it easier to bite the valance.
First, cut the tail section to about the length shown in the picture.
2,Remove the clip from the valance, rotate it 90 degrees, and
2, Remove the clip from the valance, rotate it 90 degrees, and then reinsert the clip into the valance.
(It will be a horizontal valance.) 3.
See the video for more details.
https://youtu.be/aTBLlKsEy6k
By rotating the vance clip 90 degrees
the volume of the width is increased.
3, Attach the valance to the wig and cut the part where you want the hair to spring up.
Cut the part you want to make springy, and set it by applying heat with an iron.
Each time they move away from each other, watching the balance.
The overall silhouette is determined by looking at the balance of the two pieces.
4,Avoid sideburns and cut bangs diagonally.
It is easier to make it natural by cutting it a little longer and combing the ends while shaping.
Waxed, twisted and trimmed the ends of the hair.
5,Side hair is also cut.
Slide from top to bottom as if scraping the surface.
Cutting can be easily stepped.
6,Sideburns are also done on the outside. Spray with SGS (super stiff) spray and you're done!
The key is to make sure you can see the spring from the side!
Other! If you have any problems with the style, color, or processing of your wig, please contact us.
please feel free to contact our staff!
Email: message@classewig.com
