Makeover in Esmeralda style (Intermediate**ï½¥)
An image that is difficult to reproduce in three dimensions.
This time, we will show you how to easily set it using two full wigs.
Here is what you need...
1. 2 wigs (one for base and one for volume)
2. comb
Dacquard
4. Cutting scissors, hair cutters, etc.
5. Hair irons/iron/tea irons
Hair spray
7. 1 thick hair elastic
8. Several American pins
If you want to make your wig as light as possible If you want to make your wig as light as possible
Sewing set
Cushioning material such as paper or sponge
Please prepare these items as well.
Here is what we used this time...
Click here for recommended hairspray...
Now let's get set!
First, from the front, part the bangs of the base wig 7:3.
If you divide the hair not in a straight line, but in a "wig shape" (see the image) from the whirlpool, the hair will be divided 7:3.
It will make a difference in the finished product.
Use a dacquard to avoid the top of the parting about 1.5 cm wide on each side, or about 3 cm in total.
(This will be the hair that covers the backed-up part from the top.)
(This will be the hair that covers the top part.) The remaining hairs on the left and right sides should be inverted so that the hairs are voluminous toward the top.
The left side facing you is done tightly and the right side is done modestly.
Once this has been done, apply hairspray to the "backed-up part only" to keep the fullness in place.
Let down the hairs that have been avoided with a dacquard.
Use a hair iron or an iron to straighten the hairline in an upward direction, while covering the surface with the remaining hairs to hide the back hairs (a comb makes the job easier!). ).
The ends of the hair will be cut or curled later, so use hairspray around the root of the raised area to harden the hair.
Keep the volume!
If you cut your droopy bangs a little longer...
Curl the ends of the hair into a "curl".
The key is to curl the hair sideways when viewed from the front, rather than curling the hair inward.
Be aware of curves like the letter "C" in the alphabet!
On the left side, use an iron to heat the hair to create a wave-like shape.
I curled the area under the part where I had just created volume by inverted hair outward to make it concave, then curled the area near the ear inward to make it fuller.
A small amount of hair is taken from under the set side and temple area, cut and curled.
Adjust the actual position of the cut so that the curled hair ends are slightly below the chin.
If you are worried about "I cut too much! If you are worried about
1. cut a little longer → 2. curl → 3. fine-tune the hair ends
If you are worried about "I cut it too long", you can avoid making mistakes by doing the following in this order!
*The side on the right side facing you does not need to be cut or set because it will be raised with a bandana.
From here, we will create the back of the head, full of volume and fluffy hair!
First, let's create a foundation that won't lose its weight...
Tie the hair at the back of the head in a high position, leaving enough hair at the collar and sides to create a ponytail.
This will be the main part that supports the weight of the wig, so tie it tightly with a thick hair elastic!
How to tie an elastic that won't fall apart *Classe
Once the tail is firmly inverted, use hairspray to keep the volume in place.
When the spray is dry, lift the tail and secure it near the knot with an American pin.
Hardening and squeezing (compressing) the voluminous back hair will make the hair denser and stronger.
The foundation is complete!
Now it's time to put the second wig (for volume) over the foundation!
Using American pins, attach it firmly and securely to the top of the head.
(Since this part is hidden by the bandana, it is okay if the fixing pins are noticeable♪)
Now all that's left to do is to get the overall length right and it's done!
Gorgeous wig in the Esmeralda style with plenty of volume and fluff!
(*The image is for reference only.)
I want to play actively while wearing it!"
I want to wear it for a long time without getting tired!
If you want to make your wig as light as possible, please stay with us a little longer.
-The first half is the same as the second half - tie the hair at the back of the head at a higher position and make a ponytail.
After tying it up tightly with a thicker hair elastic, cut the tail as far as you can!
Be sure to leave some length so the elastic doesn't fall out! (See image)
Once the cushioning material is placed inside the second wig (for volume), sew the laces on the forehead and back of the head side together to prevent the contents from coming out.
At this point, I recommend sewing on your comb pins to make it easier to attach to the base wig!
(Please note that the comb pin by itself cannot bear the weight, so please use an American pin in conjunction with the comb pin.)
Finally, place the volume wig on the base wig and fasten it securely to the top of the head to complete the look.
Now you've reduced a lot of weight without changing the look!
How was it?
"This year, we're taking it to the next level!"
We have introduced an intermediate level arrangement of a very popular series that can be enjoyed by those who want to "take it up a notch this year.
We hope you have a memorable Halloween with a high quality costume!
Click here to see past articles
Dreams and Magic Princess Series Summary♪
The Villains series of bewitching and beautiful
Character Series of Creation and Adventure♪
Wendy style (Advanced ★★★★★)◆ ◆
◆Jack Sparrow style (Advanced ★★★★★)◆ ◆
Alice's style
